|
|
|
 |
Model 0037 Rotary Edge Potentiometer
• Carbon Element
• For Edge Control Applications
• Mechanical Angle: 240° ±5°
• Rotational Life: 20,000 cycles
• Customize on Special Order
 |
|
 |
Model 3048—Linear Motion Potentiometer
• Conductive Plastic Element
• .2", .3", .4", or .5" Travel
• Sealed Body Standard
• Free shaft rotation
• Infinite resolution
• 2-56 UNF-2A Threaded Shaft
• Shaft options available
• Rated life: 500,000 cycles
|
|
 |
Model 3862 Single-Turn Potentiometer
• Cermet Element
• Linear Taper
• Compact size—1/2" Diameter
• Metal Bushing and Shaft
• Plain or Locking Bushing
• PC Pins and Panel Mount
• IP40 Rating
|
|
|
 |
Series 5311—Wirewound Potentiometer
• Single Turn, 352° Electrical Travel
• Mechanical Travel:
—360° (Continuous Mode)
—350° ±2° (Stop Mode)
• 3/8" Bushing Mount
• ±3% Resistance Tolerance Standard
• ±0.5% Independent Linearity
• 2.0 Watts Power Rating
• Rotational life: 500,000 revolutions
• Center Tap Option
|
|
 |
Series 6670—Conductive Plastic
• 350° Single Turn or Continuous
• Up to 4 Modules
• ±0.25% Independent Linearity
• 3.5 Watts Power Rating
• Servo or 3/8" Bushing Mount
• 2.0" Diameter
• Center Tap Option
• Rotational life: 5,000,000+ revolutions
|
|
 |
Series 7480—Wirewound Potentiometer
• 5-turn model
• 7/8" Diameter
• Bushing or Servo Mount
• 1/8" or 1/4" Metal Shaft
• 1.5 Watts Power Rating
• ±.25% Independent Linearity Standard
• ±5% Resistance Tolerance Standard
• Heavy Side Load Option
• Center Tap Option
• Dual Gang Option
• Rated 500,000+ Turns (1 lb Side Load)
|
|
|
 |
Model 96—5/8" Sealed Potentiometer
• Conductive Plastic or Cermet Element
• Sealed for Board Wash
• Linear, Audio, or Reverse Audio Taper
• Metal or Plastic shaft options
• IP65 Rating
|
|
 |
DC22—Potentiometer/Dial Combination
• Counts up to 10 turns (000-999)
• 120" Diameter Black Plastic Housing
• .70" Extension from Panel
• Accuracy: ±0.35% of Voltage Ratio
• Linearity Tolerance: ±0.25% (Standard)
• Repeatability: ±0.02% or Pot Resolution
• Over the Center Lock (standard)
• Uses ETI Systems Potentiometer MW22
|
|
 |
Model E—Wirewound Potentiometer
• 40-turn model
• 3 5/16" Diameter
• Servo or Bushing Mount
• 20 Watts Power Rating
• ±.5% Independent Linearity Standard
• ±5% Resistance Tolerance Standard
• Custom Linearity & Tolerance Available
• Up to 3 Gangs Available
• Center Tap Option
|
|
|
 |
Series P08X
• Conductive Plastic Element
• Compact Size—8mm Square
• Linear, Audio, Reverse Audio Tapers
• 1 to 4 Modules
• 100,000 Cycle Life
• Metal Shaft and Bushing
• Concentric shaft option
• Switch Option
• RoHS Compliant
|
|
 |
Model P170—Commercial Potentiometer
• Conductive Plastic Element
• Linear, Audio, Reverse Audio Taper
• 17mm Diameter
• Metal Shaft and Bushing
• SPST or SPDT Rotary Switch Option
• Solder Lugs or PC Pin Terminals
• 100,000 Cycle Life
• RoHS Compliant
|
|
 |
PDB24 Series—24mm Potentiometer
• Carbon Element
• 18 Different Resistance Taper Curves
• PC Pin or Solder Lug Terminals
• Knurled, Flatted, or Plain Shaft
• 500,000 cycles Rotational Life Option
• Detent Option
|
|
|
 |
PEC12R Series 12mm Incremental Encoder
• 2-bit Quadrature Code Output
• 360° Continuous Travel
• 12mm Square, Compact design
• Minimum Life: 30,000 cycles
• 12 or 24 Pulses per Revolution
• 0, 12 or 24 Detents
• IP Rating: IP40
|
|
 |
PS100 Series Slide Potentiometer
• 100mm Travel.
• Single or Dual Gang
• Conductive Plastic Element
• Linear, Audio, Reverse Audio Taper
• Metal Shaft
• RoHS Compliant
• Sliding Life: 100,000 cycles
|
|
 |
PTR90 Series—Modular Potentiometer
• Up to 8 Modules
• Compact Size–9mm width
• Rotary Switch Module included
• Carbon Element
• 18 Different Resistance Taper Curves
• Tracking error within ±3 dB
• Metal Shaft & Bushing
• Flatted and Knurled shaft styles
• Detent Option
• Rated IP40
|
|
|
 |
Model S127B—Modular Potentiometer
• Conductive Plastic or Cermet
• One or Two Modules
• Linear, Audio, Reverse Audio Tapers
• 1/2" Square (12.7mm)
• Bushing Dia.: 1/4", 3/8", 6, 7, 10mm
• Sealed or Dust Proof
• 1,000,000 Cycle Life
• Rotary or Push-Pull Switch Option
• Detent Option
• RoHS Compliant
• IP50 or IP67 Rated
|
|
 |
S150 Azimuth Controller
• Two Axis (X, Z)
• 180° X-Axis Deflection Angle
• 360° Z-Axis Deflection Angle
• 5.5" (140mm) Handle Height
• 10K Ohm Precision Potentiometer
• Friction Clutch
• Green LED Lamp for X-axis graduations
• IP54 Rated
• Rotational Life: 5 Million Operations
|
|
 |
Series S159—Modular Potentiometer
• Conductive Plastic or Cermet Element
• One to Four Modules
• Linear, Audio, Reverse Audio Tapers
• Bushing Dia.: 1/4", 3/8", 6, 7, 10mm
• PCB or Solder Lug Terminals
• Locking Bushing Option
• Rotary Switch Option
• External Panel and Shaft Seal Options
• RoHS Compliant
• IP40 Rated
|
|
|
 |
Model S159-10—10-Turn Potentiometer
• Wirewound or Hybrid Element
• 5/8" (15.88mm) Square
• One or Two Modules
• Linear Taper, 1 Watt Power Rating
• PCB or J-Hook Terminals
• Metal bushing and shaft
• Concentric Shaft Option
• IP40 Rated
• Wirewound Rated 1,000,000 revolutions
• Hybrid Rated 2,000,000 revolutions
• RoHS Compliant
|
|
 |
SensorCube—Position Measurement Sensor (DISCONTINUED)
• Conductive Plastic Element
• Electrical Angle 120° to 300°
• Sealed Shaft and Terminals
• Operating Temp: -55°C to 125°C
• Independent Linearity: ±2% max.
• Low cost, High Accuracy
• Wave Solder and PC Board Wash
• Rotational life: 10,000,000 Cycles
• PC Pins or Socket Connector
• Valox 420 housing standard
|
|
 |
Series 2694—Precision Turn-Counting Dial
• 10 turns
• One Piece Mounting
• 7/8" Diameter Aluminum Housing
• White Numerals on Black Matte Dial
• 3/8" Diameter Bushing
• 6mm Diameter Shaft
• Over the Center Lock (standard)
|
|
|
 |
Series 400 Linear Motion Potentiometer
• Conductive Element
• 0.5" to 6.0" Stroke Length
• Round or Rectangular Aluminum Housing
• Mounting Flange Option
• Stainless Steel 1/8" Shaft
• Terminals or Connector Wires
• Center Tap Option
• Dual Gang Option
• Life Expectancy: 10 Million Strokes
|
|
 |
Models 91, 92, 93, 94, 95 (Series 90)
5/8" Potentiometer
• Cermet or Conductive Plastic Element
• Single or Dual Gang
• Linear, Audio, and Reverse Audio Tapers
• ±5% Independent Linearity
• Rotational Life 100,000 Cycles
• Metal Bushing; Plastic or Metal Shaft
• Several Terminal Options
• Rated IP40
|
|
 |
Models 91LL, 92LL, 93LL, 95LL
(Series 90LL) Long Life Option
5/8" Long Life Potentiometer
• Conductive Plastic Element
• Single or Dual Gang
• Linear Taper only
• ±2% Independent Linearity
• Rotational Life 1,000,000 Cycles
• Metal Bushing; Plastic or Metal Shaft
• Rated IP40 / IP65
• RoHS Compliant
|
|
|
 |
SK22B—Contactless Potentiometer
• Non-Contact Inductive Element
• Continuous Rotation
• Power: 0.5 watt, Linearity: ±0.5%
• 7/8" Dia. Anodized Aluminum Housing
• M9 Thread Bushing
• Rated 100,000,000 Turns
• Servo Mount Option
• Sealed Body Option
|
|
 |
SL Series Linear Position Transducer (DISCONTINUED)
• Conductive Plastic Element
• 1" to 5" travel
• SLW Water Resistant Option
• 0.5% Linearity Standard
• Dual Wipers with Precious Metal Contacts
• 0.9" Square Anodized Aluminum Housing
• Stainless Steel Shaft
• Tested up to one billion operations
• Rated Intrinsically Safe
|
|
 |
SLNB22—Wirewound, Continuous
• Ball-Bearing Servo Mount
• .866" Dia. Aluminum Housing
• .078" Metal Shaft
• Resistance Tolerance: ±3%
• Independent Linearity: ±0.5%
• Electrical Rotation: 355° ±5°
• Power Rating: 0.75 watts
• Up to 5 Taps Available
• Sealed Body Option
• Center Tap Option
|
|
|
 |
Model SMR46—Wirewound Potentiometer
• 3, 5, 10, 15, 20, & 30-turn models
• Isolated Snap Action Switches
• 1 13/16" Diameter
• 5 Watt Power Rating (10 turn)
• Bushing or Servo Mount
• Anodized Aluminum Housing
• Stainless Steel Shaft, Brass Bushing
• O-Ring Shaft Seal, Sealed Body Options
• Rated 2,000,000 revolutions (10 Turn)
|
|
 |
SOP30B—Conductive Plastic, Single Turn
Power: 1.0 watt, Linearity: ±1%
SO30B—Wirewound, Single Turn
Power: .75 watt, Linearity: ±1%
• Oil-Filled, Submersible to 15 PSI
• Sealed Body; O-ring Shaft Seal
• 187" Metal Shaft, 3/8" Bushing
• Rated 10,000,000 Turns (CP version)
• Glass headers on terminals
• Center Tap Option
• Ball Bearings Option
|
|
 |
SP12B—Conductive Plastic Potentiometer
• Power: .2 watt, Linearity: ±2%
• 1/2" Diameter Plated Brass Housing
• Stainless Steel Shaft
• Gold Plated Brass Terminal
• 360° Continuous Mechanical Rotation
• 300° Electrical Rotation
• Rotational Stop Option
• Center Tap Option
• Servo Mount Option
|
|
|
 |
Series SPR— Commercial Potentiometer
• Hot Molded Carbon Element
• Linear, Log, Reverse Log Taper
• Power Rating: .5 Watt
• Commercial version of Mil Spec RV8
• Compact size—1/2" Diameter
• Plated Brass Housing & Bushing
• Stainless-steel Shaft
• PC Pin Terminals
• Board washable
• Locking Bushing Option
• Panel and Shaft Seal Option
• RoHS Compliant
|
|
 |
SW45B—Wirewound, Single Turn
• Power: 1 watts, Linearity: ±0.5%
• 1.614" Dia. Anodized Aluminum Housing
• 1/4" Metal Shaft, 3/8" Bushing
• Rated 1,000,000 Turns
• Gold plated terminals
• Continuous Rotation Option
• Sealed Body Option
• Servo Mount Option
• Center Tap Option
• Side Load Treatment Option
|
|
|
Model B—Wirewound Potentiometer
• 15-turn model
• 3 5/16" Diameter
• Servo or Bushing Mount
• 10 Watts Power Rating
• ±.5% Independent Linearity Standard
• ±5% Resistance Tolerance Standard
• Custom Linearity & Tolerance Available
• Up to 3 Gangs Available
• Center Tap Option
|
|
|
|
Model D—Wirewound Potentiometer
• 25-turn model
• 3 5/16" Diameter
• Servo or Bushing Mount
• 15 Watts Power Rating
• ±.5% Independent Linearity Standard
• ±5% Resistance Tolerance Standard
• Custom Linearity & Tolerance Available
• Up to 3 Gangs Available
• Center Tap Option
|
|
|
Model MR46—Wirewound Potentiometer
• 3, 5, 10, 15, 20, & 30-turn models
• 1 13/16" Diameter
• 5 Watt Power Rating (10-30 turn)
• Bushing or Servo Mount
• Silver Plated Terminals
• Anodized Aluminum Housing
• Stainless Steel Shaft, Brass Bushing
• O-Ring Shaft Seal, Sealed Body Options
• Limit Switches Option
• Rated 2,000,000 Turns (10-30 Turn)
|
|
 |
Model MW10—Multi-Turn Potentiometer
• 3, 5, and 10 turn models
• Wirewound Resistance Element
• 7/16" Diameter
• 0.3 oz-in Torque
• 1 Watt Power Rating (10 turn)
• Bushing or Servo Mount
• Gold Plated Brass Terminals
• Anodized Aluminum Housing
• Stainless Steel Shaft
• Rated 1,000,000 revolutions (10 Turn)
|
|
|
 |
Model MW20—Wirewound Potentiometer
Model MH20—Hybrid Potentiometer
• 3, 5, and 10 turn models
• 3/4" Diameter
• 2 Watts Power Rating (10 turn)
• Bushing or Servo Mount
• Gold Plated Brass Terminals
• High Temperature Plastic Housing
• Stainless Steel Shaft
• Wirewound Rated 2,000,000 Turns
• Hybrid Rated 10,000,000 Turns
| — MW20 |
| — MH20 |
|
|
 |
Model MW22—Wirewound Potentiometer
Model MH22—Hybrid Potentiometer
• 3, 5, and 10 turn models
• 7/8" Diameter
• 2 or 3 Watts Power Rating (10 turn)
• Bushing or Servo Mount
• Gold Plated Terminals
• High Temperature Plastic Housing
• Stainless Steel Shaft
• Wirewound Rated 1,000,000 Turns
• Hybrid Rated 10,000,000 Turns
| — MW22 |
| — MH22 |
|
|
 |
Model P090—Commercial Potentiometer
• Conductive Plastic Element
• Compact Size—9mm Square
• Linear, Audio, Reverse Audio Tapers
• Side Adjust or Top Adjust
• Insulated Shaft
• 100,000 Cycle Life
• Optional Center Detent
• Snap-in Clip
• RoHS Compliant
|
|
|
 |
Model P09X—Modular Potentiometer
• Conductive Plastic Element
• One to Eight Modules
• Linear, Audio, Reverse Audio Tapers
• Compact Size—9mm Square
• Side Adjust or Top Adjust
• Metal Shaft and Bushing
• 100,000 Cycle Life
• Switch / Push-Lock Option
• Concentric Shaft Option
• Center Tap Option
• RoHS Compliant
|
|
 |
Model P110—Commercial Potentiometer
• Conductive Plastic Element
• Compact Size—9mm Square
• Linear, Audio, Reverse Audio Tapers
• Insulated Shaft
• Side or Top Adjust
• With or Without Metal Bushing
• Optional Center Detent
• Snap-in Clip
• 30,000 Cycle Life
• RoHS Compliant
|
|
 |
Model P120—Commercial Potentiometer
• Conductive Plastic Element
• Audio, Linear, Reverse Audio Taper
• Single or Dual Module
• Compact Size—12mm Square
• Insulated Shaft
• Side Adjust or Top Adjust
• Snap-in Clip
• 100,000 Cycle Life
• RoHS Compliant
|
|
|
 |
Model P140—Commercial Potentiometer
• Conductive Plastic Element
• Audio, Linear, Reverse Audio Taper
• Dual Module
• Compact Size—14mm Square
• Insulated Shaft
• Side Adjust or Top Adjust
• With or Without Bushing
• Snap-in Clip
• 100,000 Cycle Life
• RoHS Compliant
|
|
 |
Model P160—Commercial Potentiometer
• Conductive Plastic Element
• Audio, Linear, Reverse Audio Taper
• 16mm Diameter
• Metal Shaft and Bushing
• 0, 1, 11, 21, or 41 Detents
• Solder Lugs or PC Pin Terminals
• Side Adjust or Rear Adjust
• 100,000 Cycle Life
• RoHS Compliant
|
|
 |
Model P230—Commercial Potentiometer
• Conductive Plastic Element
• Linear, Audio, Reverse Audio Taper
• 26.4mm (.250") Diameter
• Metal Shaft and Bushing
• 500,000 Cycle Life
• SPST Switch Option
• External Shaft Seal Option
• RoHS Compliant
|
|
|
 |
Model P231—Commercial Potentiometer
• Conductive Plastic Element
• Linear, Audio, Reverse Audio Taper
• 24mm Diameter
• Metal Shaft and Bushing
• 100,000 Cycle Life
• RoHS Compliant
|
|
 |
Model P232 / P233—Modular Potentiometer
• Conductive Plastic Element
• Single or Dual Module
• Linear, Audio, Reverse Audio Taper
• 24mm Diameter
• Metal Shaft and Bushing
• Long Life—2,000,000 Cycle Life
• Sealed or Dust Proof
• RoHS Compliant
|
|
 |
Series P270—Modular Potentiometer
• Conductive Plastic Element
• Single or Dual Module
• Linear, Audio, Reverse Audio Taper
• 24.6mm (.250") Diameter
• Metal Shaft and Bushing
• Long Life—1,000,000 Cycle Life
• Center Tap Option
• Sealed Unit Options
• RoHS Compliant
|
|
|
 |
Series PC "Slimline" Potentiometer
• Conductive Plastic element
• Space saving design
• 9mm Plastic Bushing
• Linear, Audio and Reverse Audio Taper
• Several Detent Options
• PC pin or solder lug terminals
• Mounting brackets available
• IP40 Rating
|
|
 |
PDB184 Series—17mm Potentiometer
• Carbon element
• SPDT Rotary Switch
• Audio, Linear, and Reverse Audio Tapers
• Plain or Knurled Metal Shaft
• Compact size—17mm Diameter
• PC Pin or Solder Lug Terminals
|
|
 |
PDB185-GTR—Guitar Potentiometer
• Carbon element
• Compact size—17mm Diameter
• DPDT latching-push switch
• Linear, Audio, or Reverse Audio Taper
• Metal Shaft and Bushing
• Plain or Knurled Shaft
|
|
|
 |
PEC09 Series—9mm Incremental Encoder
• 2-bit Quadrature Code Output
• 360° Continuous Travel
• 9mm Square, Compact design
• Metal Bushing and Shaft
• Minimum Life: 30,000 cycles
• 0, 12, 24, or 30 Detents
• 12, 15 Pulses per Revolution
• Momentary push switch option
• Rated IP40
|
|
 |
PEC11L Series—Incremental Encoder
• 2-bit Quadrature Code Output
• 360° Continuous Travel
• 11mm Square
• Low Profile Compact design
• Metal Bushing and Shaft
• Minimum Life: 100,000 actuations
• 0, 20, or 30 Detents
• 15 or 20 Pulses Revolution
• Momentary push switch option
|
|
 |
PEC11R Series—Incremental Encoder
• 2-bit Quadrature Code Output
• 360° Continuous Travel
• 12mm Square
• Low Profile Compact design
• Metal Bushing and Shaft
• Minimum Life: 30,000 cycles
• 0, 12, 18, or 24 Detents
• 12, 18, or 24 Pulses Revolution
• Momentary push switch option
|
|
|
 |
PEC11S Series—Incremental Encoder
• 2-bit Quadrature Code Output
• 360° Continuous Travel
• 12mm SMD Surface Mount Device
• Low Profile Compact design
• Metal Bushing and Shaft
• Minimum Life: 15,000 cycles
• 30 Detents; 15 Pulses per Revolution
• Momentary push switch option
|
|
 |
PEC16 Series 16mm Incremental Encoder
• 2-bit Quadrature Code Output
• 360° Continuous Travel
• Low Cost, High Reliability
• Minimum Life: 30,000 cycles
• Vertical or Horizontal Mounting
• 12 or 24 Pulses per Revolution
• 0, 12 or 24 Detents
• IP Rating: IP40
|
|
 |
PEL12 Series—Incremental Encoder
• 2-bit Quadrature Code Output
• Ilumminated Shaft—1, 2, or 3 LEDs
• 360° Continuous Travel
• Low Profile Compact design
• With Bushing or Bushingless
• Minimum Life: 30,000 cycles
• 24 Pulses per Revolution
• 24 Detent option
• Rated IP40
|
|
|
 |
PES12 Series—12mm Shaftless Encoder
• Quadrature Incremental Output
• 360° Continuous Travel
• 12mm Square, Compact design
• Minimum Life: 30,000 cycles
• 24 Pulses per Revolution
• 24 Detent option
• IP Rating: IP40
|
|
 |
PRS11S Series—11mm Potentiometer
• Carbon Element
• SMD Surface Mount Device profile
• 18 Different Resistance Taper Curves
• Metal Shaft and Bushing
• Wide operating temperature range
• Rated IP40
|
|
 |
PS Series Slide Potentiometer
• 15mm to 60mm Travel.
• Conductive Plastic Element
• Single or Dual Gang
• Linear, Audio, Reverse Audio Taper
• 22 Plastic and Metal Shaft styles
• Center Detent option
• Sliding Life: 100,000 cycles
|
|
|
 |
PSM Series—Motorized Potentiometer
• 100 mm Travel Slide Potentiometer
• Long life carbon element
• Single Gang
• 18 Different Resistance Taper Curves
• Touch sense lever
• PC terminals, Snap-in connector
|
|
 |
PTA Series—Slide Potentiometer
• 15, 20, 30, 45, 60mm Travel
• Carbon Element
• Single or Dual Gang
• Metal Housing
• Linear or Audio Taper
• Tracking 3dB at -40dB to 0dB
• Several Lever options
• Center Detent option
• Rubber Dust Cover option
|
|
 |
PTD90 Series—Modular Potentiometer
• Up to 8 Modules
• Compact Size–9mm width
• Carbon Element
• 18 Different Resistance Taper Curves
• Tracking error within ±3 dB
• Metal Shaft and Bushing
• Knurled and flatted shaft styles
• Detent Option
• Rated IP40
|
|
|
 |
PTH90 Series—9 mm Potentiometer
• Carbon Resistance Element
• 2 Resistance Modules
• Dual Concentric Shaft
• 18 Different Resistance Taper Curves
• Rotary Switch Module Option
• Metal Shaft and Bushing
• Knurled, Slotted, and Flatted shaft styles
• Detent Option
• Rated IP40
|
|
 |
PTJ90 Series—9 mm Potentiometer
• Carbon Resistance Element
• 2 Resistance Modules
• Dual Concentric Shaft
• 18 Different Resistance Taper Curves
• Push-Push Switch Option
• Metal Shaft and Bushing
• Flatted and Slotted shaft styles
• Detent Option
• Rated IP40
|
|
 |
PTL Series—Slide Potentiometer with LED
• 20, 30, 45, 60mm Travel
• Red, Orange, Green, Amber, White LED
• Carbon Element, Single Gang
• 18 Different Resistance Taper Curves
• Tracking Error ±2dB
• 10, 15, 19mm Lever Length
• Center Detent option
|
|
|
 |
PTM90 Series—9mm Potentiometer
• Push-On/Push-Off Switch Module
• Carbon Resistance Element
• 2 Resistance Modules
• 18 Different Resistance Taper Curves
• Tracking error within ±3 dB
• Metal Shaft and Bushing
• Knurled and flatted shaft styles
• Detent Option
• Rated IP40
|
|
 |
PTP90 Series—9 mm Potentiometer
• Push Latching Shaft
• Single or Dual Gang
• 18 Different Resistance Taper Curves
• Carbon Element
• Metal Shaft and Bushing
• Knurled, Slotted, and Flatted shaft styles
• Detent Option
• Rated IP40
|
|
 |
Model 0473 Shaftless Rotary Potentiometer
• Carbon Resistive Element
• Linear Resistance Taper
• Plug-in shaft available as accessory
• Vertical or Horizontal Mounting
• Rotational Life: 10,000 cycles
|
|
|
 |
Model 0502 Rotary Potentiometer
• Carbon Resistive Element
• Linear Resistance Taper
• ±2% to ±5% Linearity
• Diecast Bushing and Shaft
• Vertical or Horizontal Mounting
|
|
 |
Model 0620 Sealed Rotary Potentiometer
• Cermet Resistive Element
• Linear Resistance Taper
• ±5% Linearity
• Locking Bushing Option
• PC Pin or Panel Mount
|
|
 |
Model 0621 Sealed Rotary Potentiometer
• Cermet Resistive Element
• Linear Resistance Taper
• ±5% Linearity
• Locking Bushing Option
• Panel Mount
|
|
|
 |
Series 2RV7—Mil-Spec Potentiometer
• Dual Hot Molded Carbon Element
• Linear, Log, Reverse Log Tapers
• Gold or Tin Plated Terminals
• Stainless Steel Shaft and Housing
• Standard or Locking Bushing
• Panel and Shaft Seal Options
• Meets or Exceeds MIL-R-94 (QPL Listed)
• Series KK Commercial Equivalent
|
|
 |
Model 3046 Linear Motion Potentiometer
• Conductive Plastic Element
• .15", .25", or .35" Travel
• Sealed Body Standard
• Free shaft rotation
• Infinite resolution
• 0-80 UNF-2A Threaded Shaft
• Shaft options available
• Rated life: 500,000 cycles
|
|
 |
PTV09 Series—9mm Potentiometer
• Carbon Element
• 18 Different Resistance Taper Curves
• Flatted or Knurled Insulated shaft
• Vertical or Horizontal PCB Mount
• Center Detent Option
|
|
|
 |
PTV/PTT Series—12mm Potentiometer
• Carbon Element
• Single or Dual Gang
• 18 Different Resistance Taper Curves
• Flatted Insulated shaft
• Vertical or Horizontal PCB Mount
• Center Tap Option
• Center Detent Option
|
|
 |
3310 Series—9mm Sealed Potentiometer
• Conductive Plastic Element
• Single or Dual Potentiometer
• Potentiometer Plus Switch Option
• Linear Taper
• Sealed for Board Wash
• PC Pins and Bushing Mount
• Metal or Plastic shaft options
• IP67 Rating
|
|
|
3315 Series—Sealed Incremental Encoder
• 2-bit Quadrature Code Output
• 360° Continuous Travel
• 9mm Square, Compact design
• Minimum Life: 100,000 cycles @ 6 PPR
• 6, 12 Pulses per Revolution
• Bushingless option
• IP Rating: IP67
|
|
|
 |
Model 3360 Sealed Panel Control
• Conductive Plastic Element
• Linear Taper
• Compact size—6mm Square
• Sealed for Board Wash
• Plastic Bushing and Shaft
• PC Pins and Panel Mount
• IP67 Rating
|
|
 |
Series 3371—Conductive Plastic
• 350° Single Turn or Continuous
• ±10% Resistance Tolerance
• ±0.5% Independent Linearity
• 1/4" Metal Shaft; 3/8" Bushing
• 1 5/16" Diameter
• 0.75 Watts Power Rating
• Center Tap Option
• IP66 Seal Option
• RoHS 2 Compliant
• Rotational life: 2,000,000 revolutions
|
|
 |
Series 3850 3/4" Diameter Potentiometer
• Model 3851 - Single-Turn Conductive
• Model 3852 - Single-Turn Cermet
• Model 3856 - 3 3/4-Turn Cermet
• Linear and Audio Taper
• Metal Bushing and Shaft
• Plain or Locking Bushing
• PC Pins and Panel Mount
• IP40 Rating
|
|
|
 |
Series 392 / RV6— Mil-Spec Potentiometer
• Conductive Plastic Element
• 1/2" Diameter Housing
• Washable and Wave Solderable
• Shaft Seal Standard
• Standard or Locking Bushing
• PC Terminals or Solder Hook Terminals
• IP Rated (IP67)
• 392CX QPL listed to MIL-R-94 Style RV6
• RoHS Compliant
|
|
 |
Model 405 Linear Motion Potentiometer
• Conductive Plastic Element
• 1", 2", 3" Stroke Length
• ½" Dia. Stainless Steel Housing
• ⅛" Dia. Stainless Steel Shaft
• 12" Wire Leads
• RoHS 2 Compliant
• 5-40 UNC-3A Threaded Shaft Option
• Dual Gang Option
• Life Expectancy: 5 Million Strokes
|
|
 |
Series 5100—Wirewound Potentiometer
• Single Turn
• Up to 4 Modules
• 354° Electrical Travel
• Servo or Bushing Mount
• 7/8" Diameter
• 1/8" Metal Shaft
• ±0.5% Independent Linearity
• 0.75 Watts Power Rating
• Center Tap Option
• Rotational life: 500,000+ revolutions
|
|
|
 |
Series 5400—Wirewound Potentiometer
• Single Turn
• Up to 4 Modules
• Servo or 1/2" Bushing Mount
• 1-7/16" Diameter
• 1/4" Metal Shaft
• ±0.5% Independent Linearity
• 2.0 Watts Power Rating
• Center Tap Option
• Rotational life: 500,000+ revolutions
|
|
 |
Series 5610—Wirewound Potentiometer
• Single Turn
• Up to 4 Modules
• Servo or 3/8" Bushing Mount
• Electrical Travel: 356° ±1°
• ±0.5% Linearity Standard
• 2" Diameter, 1/4" Metal Shaft
• 3.5 Watts Power Rating
• Center Tap Option
• Rotational life: 1,000,000 revolutions
|
|
 |
Series 5710—Wirewound Potentiometer
• Single Turn, Continuous
• Up to 4 Modules
• Servo or 1/2" Bushing Mount
• Electrical Travel: 358° ±1°
• 0.5% Linearity
• 3" Diameter, 1/4" Metal Shaft
• 5 Watts Power Rating
• Center Tap Option
• Rotational life: 1,000,000+ revolutions
|
|
|
 |
Series 578—Commercial Potentiometer
• Conductive Plastic Resistance Element (DISCONTINUED)
• Smooth feel, quiet electrical output
• Linear, Audio, Reverse Audio Taper
• 1% Independent Linearity
• .90" Diameter
• Molded plastic housing
• Rotational life: 5,000,000 revolutions
• Many terminal configurations
• Center Tap Option
|
|
 |
Series 6143—Conductive Plastic
• 360° Continuous Travel
• Ball Bearing or Bronze Sleeve Bearing
• ±1% Independent Linearity
• .840" Diameter, Servo Mount
• 1/8" Metal Shaft
• 1.0 Watts Power Rating
• Rotational life: 10M or 50M revolutions
|
|
 |
Series 6173—Conductive Plastic
• 346° Single Turn or Continuous
• ±0.5% Independent Linearity
• Servo Mount, 1/8" Metal Shaft
• Up to 4 Modules
• 1.0 Watts Power Rating
• Center Tap Option
• Rotational life: 5,000,000+ revolutions
|
|
|
 |
Series 6273—Conductive Plastic
• 346° Single Turn or Continuous
• Up to 4 Modules
• ±0.5% Independent Linearity
• 1.5 Watts Power Rating
• 1/8" Metal Shaft, Servo mount
• 1.062" Diameter
• Center Tap Option
• Rotational life: 5,000,000+ revolutions
|
|
 |
Series 6370—Conductive Plastic
• 346° Single Turn or Continuous
• ±0.5% Independent Linearity
• 2.0 Watts Power Rating
• Servo or 3/8" Bushing Mount
• Anodized Aluminum Housing
• Front and Rear Ball Bearings
• 1/4" Metal Shaft
• Center Tap Option
• Rotational life: 5,000,000+ revolutions
|
|
 |
Series 7200—Wirewound Potentiometer
• 10-turn model
• 7/8" Diameter
• Bushing or Servo Mount
• Metal Shaft and Bushing
• ±3% Resistance Tolerance
• ±0.25% Independent Linearity
• 2 Watts Power Rating
• Dual Gang Option
• Center Tap Option
• Rated 2,000,000+ Turns
|
|
|
 |
Model 7246—Wirewound Potentiometer
• 10-turn model
• 7/8" Diameter
• 2 Watts Power Rating
• ±.25% Independent Linearity
• ±5% Resistance Tolerance
• 1/4" Metal Shaft, 3/8" Bushing
• Center Tap Option
• Panel and Shaft Seal Options
• Rated 1,000,000 revolutions
|
|
 |
Series 7270—Wirewound Potentiometer
• 10-turn model
• 7/8" Diameter
• 2 Watts Power Rating
• ±.25% Independent Linearity
• ±5% Resistance Tolerance
• 1/4" or 6mm Diameter Shaft
• 3/8" Diameter Bushing
• Center Tap Option
• Tempco ±20ppm/°C
• Rated 500,000+ revolutions
|
|
|
Series 7280—Wirewound Potentiometer
• 10-turn model
• 7/8" Diameter
• 2 Watts Power Rating
• ±.25% Independent Linearity Standard
• ±5% Resistance Tolerance Standard
• Bushing or Servo Mount
• 6mm, 1/8" or 1/4" Diameter Shaft
• Center Tap Option
• Tempco ±20ppm/°C
• Rated 1,000,000+ revolutions
|
|
|
 |
Series 7380—Wirewound Potentiometer
• 3-turn model
• 7/8" Diameter
• 1.5 Watts Power Rating
• ±.25% Independent Linearity Standard
• ±5% Resistance Tolerance Standard
• Bushing or Servo Mount
• 1/8" or 1/4" Diameter Shaft
• Heavy Side Load Option
• Center Tap Option
• Tempco ±20ppm/°C
• Rated 300,000+ Turns (1 lb Side Load)
|
|
 |
Series 7600—Wirewound Potentiometer
• 10-turn model
• 1-13/16" Diameter
• 3/8" Bushing or Servo Mount
• 5 Watts Power Rating
• ±.15% Independent Linearity Standard
• ±5% Resistance Tolerance Standard
• Center Tap Option
• Dual Gang Option
• Rated 2,000,000+ revolutions
|
|
 |
Series 8136—Hybrid Potentiometer
• 10-turn model
• 7/8" Diameter
• Plastic Shaft and Bushing
• 2 Watts Power Rating
• ±.15% Independent Linearity Standard
• ±5% Resistance Tolerance Standard
• Center Tap Option
• Rated 1,000,000+ revolutions
|
|
|
 |
Series 8140—Hybrid Potentiometer
• 10-turn model
• 7/8" Diameter
• Bushing or Servo Mount
• 2 Watts Power Rating
• ±.25% Independent Linearity Standard
• ±10% Resistance Tolerance Standard
• Dual Gang Available
• Center Tap Option
• Rated 5,000,000+ revolutions
|
|
 |
Model 82—Premium Guitar Potentiometer
• Conductive Polymer element
• Very low noise
• Audio Taper
• 10% Resistance tolerance
• ±5% Independent Linearity
• Plain or knurled shaft
• Long Bushing option
|
|
 |
Series 9300—Wirewound Potentiometer
• 3-turn model
• 1 13/16" Diameter
• 1/4" Shaft; Servo or Bushing Mount
• 3 Watts Power Rating
• ±.25% Independent Linearity Standard
• ±5% Resistance Tolerance Standard
• Up to 3 Gangs Available
• Center Tap Option
• Rated 2,000,000+ revolutions
|
|
|
 |
Model 95 Premium Guitar Potentiometer
• Conductive Polymer element
• Low noise/low impedance
• Audio and linear tapers
• 10% Resistance tolerance
• ±5% Independent Linearity
• Plain or knurled shaft
• Long Bushing option
• Rated IP40
|
|
 |
S127 Series—Modular Potentiometer
• Conductive Plastic Resistance Element
• One to Four Modules
• Linear, Audio, Reverse Audio Tapers
• 1/2" Square (12.7mm)
• Sealed or Dust Proof
• 1,000,000 Cycle Life
• Rotary Switch Option
• Detent Option
• RoHS Compliant
• IP50 or IP67 Rated
|
|
 |
Model 97 / 99—5/8" Potentiometer
• Conductive Plastic or Cermet Element
• DPST Rotary Switch
• PC Pin or Solder Lug Terminals
• Linear, Audio, or Reverse Audio Taper
• Metal or Plastic shaft options
• IP40 Rating
|
|
|
 |
Custom Resistive Tracks
• Conductive Plastic Element
• Narrow Variable Resistance Band
• 45° Centered Tracking
• 312° ±5° Mechanical Rotation
• Stainless Steel or Plated Brass Shaft
• Up to 1,500,000 cycles Rotational Life
• RoHS Compliant
|
|
|
