Model 3862—1/2" Diameter Single-Turn Panel Control
|
|
|
Features: |
• |
Cermet element |
• |
Linear Taper |
• |
RoHS compliant version available
|
|
|
Model
|
Model 3862
|
1/2" Diameter Single-Turn Panel Control |
|
|
|
Electrical Specifications
|
Resistance
|
1K ohms to 1.0 megohm |
Resistance Tolerance
|
A Taper: ±10% H Taper: ±5%
|
Independent Linearity
|
±5%
|
Absolute Minimum Resistance
|
2 ohms maximum |
Effective Electrical Angle
|
260° ±10°
|
Contact Resistance Variation
|
±3% or 6 ohms
(whichever is greater)
|
Dielectric Withstanding Voltage
|
Sea Level: 750 VAC minimum
70,000 Feet: 350 VAC minimum
(MIL-STD-202—Method 301)
|
Insulation Resistance |
1,000 megohms minimum (500VDC)
|
Power Rating @ 70°C |
+70°: 1 watt
+125°: 0 watt
(Voltage Limited By Power Dissipation or 200 VAC, whichever is less)
|
Theoretical Resolution
|
Essentially infinite
|
|
|
|
Mechanical Specifications
|
Stop Strength
|
33 N-cm (3 lb.-in.) maximum |
Mechanical Angle
|
295° ±3° |
Starting and Running Torque
|
3.53 N-cm (5.0 oz.-in.) maximum |
Mounting (Torque on Bushing)
|
1.7-2.0 N-m (15-18 lb.-in.) maximum |
Shaft Locking Torque with Locking Bushings
|
14.12 N-cm (20 oz.-in.) |
Weight
|
25 grams maximum |
Terminals
|
Printed circuit pins or J-Hooks |
Soldering Condition
|
Recommended hand soldering using Sn85/Ag5 no clean solder, 0.025" wire diameter.
Maximum temperature 399°C (750°F) for 3 seconds. No wash process to be used with no clean flux.
Part can be wave soldered at 260°C (500°F) for 5 seconds. No wash process with no clean flux. |
Marking
|
Manufacturer’s trademark, wiring diagram, date code,
resistance, manufacturer’s part number |
Ganging
|
1 module maximum |
Hardware
|
One lockwasher and one mounting nut is shipped with each potentiometer,
except where noted in the part number. |
|
|
Environmental Specifications
|
Operating Temperature Range
|
-40°C to +125°C |
Storage Temperature Range
|
-65°C to +125°C |
Temperature Coefficient
|
±150 ppm/°C over Storage Temperature Range |
Vibration—20 G
|
Total Resistance Shift: ±2% maximum
Voltage Ratio Shift: ±6% maximum |
Shock—100 G
|
Total Resistance Shift: ±2% maximum
Voltage Ratio Shift: ±6% maximum |
Load Life—1,000 Hours
|
Total Resistance Shift: ±3% maximum |
Rotational Life (No Load)
|
(C & N Bushings): 50,000 cycles
(E & T Bushings): 1,000 cycles
Total Resistance Shift: ±5% maximum
Contact Resistance Variation: ±3% or 6 ohms (whichever is greater) |
Moisture Resistance
|
Total Resistance Shift: ±2% TRS maximum
Insulation Resistance (500 VDC): 100 megohms minimum
MIL-STD-202, Method 103, Condition B |
Salt Spray
|
MIL-STD-202, Method 101, Condition A |
IP Rating
|
IP40 |
|
|
|
|
|