Series 400 Linear Motion Potentiometer
.5" to 6" Stroke Length. Conductive Plastic Element
|
|
|
Features: |
• |
8 different configurations |
• |
Travel length: 0.5" to 6.00" |
• |
Linearity: ±0.25% to ±1.0% |
• |
Aluminum Housing, Brackets and Caps |
• |
Stainless Steel 1/8" Shafts |
Options: |
• |
Center Tap |
• |
Linearity Tape |
• |
Two Gangs (Dual Section) |
|
|
Model Styles
|
Model 423
|
Round Body, Wire Leads |
Model 424
|
Round Body, Terminals |
Model 432
|
Round with Mounting Flange, Wire Leads |
Model 434
|
Round with Mounting Flange, Terminals |
Model 472
|
Rectangular, Wire Leads |
Model 474
|
Rectangular, Terminals |
Model 482
|
Rectangular with Mounting Flange, Wire Leads |
Model 484
|
Rectangular with Mounting Flange, Terminals |
|
|
|
Electrical Specifications
|
Standard Resistance Range
|
1K to 1.5Meg (varies with selected Electrical Travel) |
Resistance Tolerance
|
±10% Standard; up to ±5% available
|
Independent Linearity
|
±0.25% to ±1.0% (varies with selected Electrical Travel) |
Dielectric Strength
|
1,000V rms
|
Insulation Resistance
|
1,000 Megohms Minimum |
Power Rating
|
0.5 to 3.0 Watts (varies with selected Electrical Travel) |
Output Smoothness
|
0.1% at 10" to 18"/ Minute, Maximum |
Resolution
|
Essentially Infinite
|
Temperature Coefficient of Resistance |
-400ppm/°C (Special TCR available to ±100ppm/°C)
|
Temperature Coefficient of Output Voltage |
-400ppm/°C—Measured with 10 VDC CW to CCW and slider at 50% of electrical travel.
|
|
|
|
Mechanical Specifications
|
Actuating Force
|
10 oz. Maximum |
Shaft Rotation
|
Continuous
|
Backlash
|
.003" maximum
|
Static Stop Strength
|
10 lb. minimum
|
|
|
|
Environmental Specifications
|
Temperature Range
|
Static: -55°C to +125°C Dynamic: -40°C to +125°C
|
Load Life
|
10 million shaft actuations at rated power & 70°C, maximum 10% ΔR
| |
|
|
|
|
|