|  Home   |  State-Elec.com   |  About State   |  Support   |
Home Page
Non-Contact Position Sensor Selection Guide
Model HRS100 Hall Effect Position Sensor
HRS100 Hall Effect Rotary Position Sensor (DISCONTINUED)
  • Non-contact Rotary Position Sensor
  • Electrical Angle: 90° or 180°
  • 90° Linearity: 2% or Less
  • 180° Linearity: 5% or Less
  • Output: 0 to 2.5V or 0 to 5.0V
  • Stainless steel housing
  • Rotational Torque: 2.0 in. oz. max
  • Rotational Life: 50,000,000 cycles min.
Model LHK15 Linear Motion Potentiometer
LHK15 Hall Effect Linear Position Sensor
  • Hall Effect Element
  • 30mm Stroke Length
  • Single, Dual, or Dual Independent Output
  • Front and Rear Extended Shaft
  • Thermoset Plastic Housing
  • 6" Connector Wires
  • IP65 rating
  • Life Expectancy: 50 Million Strokes
RPN Hall Effect Position Sensor
RPN Hall Effect Rotary Position Sensor
  • Several Output Options:
  • Single or Dual Independent Output:
    4mA to 20mA; 0.25Vdc to 4.75 Vdc
    1Vdc to 9Vdc; 3 Vdc to 5 Vdc
  • Applied Voltage: 5VDC to 30VDC
  • Lever Versions Available
  • Integral AMP Superseal Connector
  • Suitable for Harsh Environments
  • Rotational Life: 30 Million Operations
  • IP67 Rated

RTY Hall Effect Position Sensor
RTY Hall Effect Rotary Position Sensor
  • 8 Electrical Angles from 50° to 360°
  • Supply Voltage: 5Vdc or 10-30Vdc
  • Output Voltage: 0.5V to 4.5V
  • 12-bit Resolution
  • Integral AMP Superseal Connector
  • IP67 Rated
  • Suitable for Harsh Environments
  • Rotational Life: 50 Million Operations
Model 6120 Hall Effect Position Sensor
6120 Hall Effect Rotary Position Sensor
  • Output: 0.25V to 4.75V Typical
  • Electrical Angle: 35° to 360°
  • 360° Continuous (320° Stop Option)
  • 500 RPM Maximum Rotational Speed
  • 1/8" or 1/4" Shaft
  • 1/4" or 3/8" Bushing
  • Center Tap Option
  • Shaft Lock Option
  • Rotational Life: 10 million shaft rev. min.
Series 6150 Potentiometer
6150—Hall Effect Rotary Position Sensor
  • 360° Continuous Travel
  • Ball Bearing or Bronze Sleeve Bearing
  • ±0.5% Independent Linearity
  • 0.2V to 4.8V Typical Output Voltage
  • .840" Diameter, Servo Mount
  • 1/8" Metal Shaft
  • Rotational life: 10M or 25M revolutions
  • IP50 Rated

 HSM22 Hall Effect Position Sensor
HSM22 Hall Effect Rotary Position Sensor
  • Output: 0.25V to 4.75V Typical
  • Electrical Angle: 360° Continuous
  • Single, Dual, or Dual Independent Output
  • Independent Linearity: ±0.5%
  • Applied Voltage: 5VDC ±10%
  • Effective Output: 10% to 90% Vin
  • RoHS compliant
  • Rotational Life: 50 Million Operations
Click here to download PDF Datasheets from the Technical Library.