Series 6370 Precision Potentiometer
1 5/16" Diameter, Single Turn Conductive Plastic
|
|
|
Features: |
• |
Conductive Plastic element |
• |
1/4" Metal Shaft, 3/8" Bushing or Servo mount |
• |
Anodized Aluminum Housing |
• |
Front and Rear Ball Bearings |
• |
±10% Resistance Tolerance Standard |
• |
±0.5% Independent Linearity Standard |
|
Options: |
• |
Rear Shaft Extension |
• |
External Panel and Shaft Seal Options. More information |
|
|
Model Styles
|
6371
|
1/4" Metal Shaft, 3/8" Bushing |
6373
|
1/4" Metal Shaft, Servo mount |
|
|
|
Electrical Specifications
|
Resistance Range
|
1K to 300K Ohms |
Resistance Tolerance
|
±10% Standard; up to ±5% available
|
Independent Linearity
|
±0.5% Standard; up to ±0.1% available
|
Maximum Input Voltage |
400Vdc not to exceed power rating
|
Power Rating
|
2.0 W at 70°C derating to 0 W at 125°C
|
Dielectric Strength
|
1,000V rms
|
Insulation Resistance
|
1,000 Megohms Minimum |
Output Smoothness
|
0.1% Maximum |
Actual Electrical Travel
|
348° Nominal |
Electrical Continuity Travel
|
350° Minimum |
End Voltage, Maximum
|
±0.35% of input voltage
|
Tap Tolerance
|
±0.5% of input voltage |
Resolution
|
Essentially infinite
|
Temperature Coefficient
|
-800 ppm/°C (Special tempco available to ±100ppm/°C)
|
|
|
|
Mechanical Specifications
|
Total Mechanical Travel
|
360° Continuous |
Number of Gangs
|
1 Maximum
|
Weight
|
2.0 oz. Nominal |
Shaft Runout, T.I.R.
|
.001" Maximum
|
Pilot Dia. Runout, T.I.R.
|
.0015" Maximum
|
Lateral Runout, T.I.R.
|
.002" Maximum
|
Shaft Radial Play
|
.002" Maximum
|
Start/Run Torque
|
0.7 / 0.5 oz.-in. Maximum
|
|
|
|
Environmental Specifications (MIL-R-12934)
|
Temperature Range
|
Static: -65°C to +125°C Dynamic: -40°C to +125°C
|
Temperature Cycling
|
5 cycles, -65°C to +125°C (10% ΔR)
|
Shock
|
100G's, 6ms Sawtooth (0.1ms discontinuity max.)
|
Vibration
|
15G's, 10 to 500 Hz (2% ΔR, 0.1ms discontinuity max.)
|
Moisture Resistance
|
Ten 24 hour cycles (10% ΔR)
|
High Temp Exposure
|
1,000 hours at 125°C (0.5% ΔR)
|
Rotational Load Life
|
5 mil. shaft rev. +900 hrs. at rated wattage at 70°C (10% ΔR)
|
|
|
|
|
|
|