Series 309 Modular Potentiometer
Thick-Film Cermet—1/2" square
|
|
| Description |
| The Series 309 is a high-performance, low-cost sealed Thick Film Cermet potentiometer, available with switch and potentiometer modules with up to three sections. For equivalent units using conductive plastic elements, see Series 308
|
|
|
|
|
| Features: |
| • |
Compact - 1/2 in. (12.7mm) miniature, totally sealed, modular size
|
| • |
Cost-effective - sealed modules eliminate hand soldering.
|
| • |
Rugged - Horizontal or vertical mountings with support plates. Nickel-plated brass shaft and bushings in various diameters and lengths. Insert molded gold plated terminals for strength.
|
| • |
Precision Made - screen-printed thick film cermet elements.
|
| • |
Stability: -40°C to +150°C operating temperature.
|
|
|
|
|
|
Electrical Specifications
|
Resistance Range
|
5 ohms to 5 Megohms - Linear Taper
100 ohms to 2 Megohms - Logarithmic Taper
|
Resistance Tolerance
|
±10% standard; ±5% special order
Trimmers ±20%
|
End Resistance
|
2 ohms max., 5 ohms to 2500 ohms
4 ohms max., 5K ohms and above
|
Voltage Coefficient
|
.008% per Volt maximum
|
Power Rating
|
1 watt @ 85°C.
Derate linearly to zero watts at 150°C
Derate tapered units, trimmers or PC mounted units by 50%
|
Linearity Tolerance
|
±5% independent
|
Non-linear Tapers
|
Linear: Right or left-hand available.
Non-Linear: Logarithmic or reverse Logarithmic.
Specials available.
|
Taper Tolerance
|
±20% of nominal resistance @ 50%; ±3% of mechanical rotation
|
Electrical Rotation
|
295° ±5°
|
Effective Rotation
|
265° ±5°
|
Working Voltage
|
350 VDC across end terminals
(power not to exceed rating)
|
Dynamic Noise
|
Standard: Linear single controls maximum initial noise level of 3% of total resistance. 1.5% available on special order
|
Rotary Switch
|
SPST or SPDT, CCW or CW, 125ma @ 28Vdc.(Type AL)
|
Push Switch
|
SPDT - 125ma @ 28Vdc, Push Momentary (Type DJ)
|
|
|
|
Mechanical Specifications
|
Mechanical
|
Thermoplastic polyester, blue. Mechanical(U.L. SE-O rating)
|
Hardware Supplied
|
Nut: brass, nickel-plated
Lockwasher: phosphorous bronze, nickel-plated
|
Mechanical Rotation
|
295° ±5° |
Rotational Life
|
Life under load is 50,000 cycles (Linear control with plain bushing)
Trimmer life under load is 5,000 cycles
|
Torque Range
|
.20 to 3.0 oz. in. (Single module)
.3 to 3.5 oz. in. (Dual module)
.4 to 4.5 oz. in. (Triple)
Other torque options available.
|
Torque Variation
|
Within control .5 oz. in. maximum
|
Stop Torque
|
3 lb. in. minimum Mechanical (metal shaft)
Other torque options available
|
Terminals
|
Gold-coated PC terminals or solder hook style
PC pins fit .100 grid spacing
Terminal mounting options available
|
Weight
|
Metal shaft & bushing (approx.):
0.19 oz.(Single), .27 oz.(Dual), .35 oz.(Triple)
|
Bushing Material
|
Brass nickel plated
|
Bushing Diameters
|
Supplied in 1/4"-32 NEF 2A thread (6.35mm)
and 3.8"-32 NEF 2A thread (9.53mm)
|
Bushing Lengths
|
0.25 in. (6.35mm), .375 in. (9.53mm), .5 in. (12.7mm)
|
Bushing Styles
|
Plain, locking and trimmer
|
|
|
|
|
|
|
|
|
|
|
