|  Home   |  State-Elec.com   |  About State   |  Support   |
Home Page > Precision Multi-Turn Potentiometers

Model C Precision Multi-Turn Potentiometer
1-13/16" Diameter, 3-Turn Wirewound Element
Model C 1-13/16 inch Precision 3-Turn Potentimeter
Features:
3-Turn Wirewound element
±3% Resistance Tolerance Standard
±0.5% Independent Linearity Standard
1/4" Shaft; 3/8" Bushing
Up to 3 Gangs
Options:
Center Tap
Rear Gang Extension
External Panel and Shaft Seal Options.
More information

Model Styles
Model C
1/4" Shaft, 3/8" Bushing

Electrical Specifications
Resistance Range
5 to 194.7K Ohms
Resistance Tolerance
<100 Ohms = ±5%
≥100 Ohms = ±3%
Independent Linearity
±0.50% (Standard); up to ±0.10% available
Power Rating
3.0 Watts at 40°C derating to 0 Watts at 85°C
Input Voltage
1,000Vdc maximum (not to exceed power rating)
Dielectric Strength
1,000V rms
Insulation Resistance
1,000 Megohms minimum
Noise, maximum
500 Ohms: RT ≤ 800 Ohms
250 Ohms: RT > 800 Ohms
Actual Electrical Travel
1080° +4° -0°
Tap Tolerance
≤ 25 Ohms = ±2°
< 100 Ohms = ±1.5°
≥ 100 Ohms = ±1.0°
End Voltage
(% of input voltage)
<100 Ohms = 1%
>100 Ohms = .5%

Mechanical Specifications
Total Mechanical Travel
1080° +4° -0°
Number of Gangs
3 maximum
Weight
2.5 oz. Nominal (single gang)
Static Stop Strength
350 oz.-in.
Backlash

Panel Nut Tightening Torque
25 lb.-in. maximum
Shaft End Play
.005" maximum
Shaft Runout
.0005" T.I.R. maximum
Pilot Diameter Runout
.002" T.I.R. maximum
Lateral Runout
.003" T.I.R. maximum
Shaft Radial Play
.004" maximum
Start/Run Torque
3.0 oz.-in. maximum (per gang)

Environmental Specifications (MIL-R-12934)
Temperature Range
Static: -65°C to +85°C
Dynamic: -40°C to +85°C
Temperature Cycling
5 cycles, -65°C to +85°C (5% ΔR)
Shock
10G's, 10 to 500 Hz
(5% ΔRT; 0.1ms discontinuity max.)
Vibration
6 hours, 10 to 55 Hz
(5% ΔR, 0.1ms discontinuity max.)
Moisture Resistance
Ten 24 hour cycles (3% ΔR)
High Temp Exposure
1,000 hours at 85°C (5% ΔR)
Rotational Load Life
2 mil. shaft rev. + 900 hrs.
at rated wattage at 40°C (5%ΔR)

  For more information:
Check Stock & Pricing    PDF Datasheet    Request for Quotation

Model C
Datasheet
Request For Quotation
Check Stock & Pricing