|  Home   |  State-Elec.com   |  About State   |  Support   |
Home Page > Linear Motion Potentiometers

Series 404 Linear Motion Potentiometer
.5" Stroke Length. Conductive Plastic Element, Spring Return
Model 404 404 Linear Position Sensor
Features:
.5 inches linear travel with spring return
Accurate position feedback
Low cost
Compact design for small spaces
Conductive plastic technology
Long life - 5 million actuations

Electrical Specifications
Resistance
1KΩ to 150KΩ
Resistance Tolerance
±10% standard
Independent Linearity
±1.0% standard
Max Input Voltage
400Vdc
Power Rating
Linear: 0.25 watt
Dielectric Strength
1,000 V rms
Insulation Resistance
1,000 Megohms Minimum
Output Smoothness
0.1% at 10" to 18"/ Minute Maximum
Actual Electrical Travel
Nominal 0.50"±.015" (12.7mm±0.38mm)
Resolution
Essentially infinite
Temperature Coeff. of Resistance -400 ppm/°C typical
Special TCR available to ±100 ppm/°C.
Temperature Coeff. of Output Voltage
±10 ppm/°C typical—Measured with 10 VDC CW to CCW and slider at 50% of electrical travel

Mechanical Specifications
Total Mechanical Trave
0.56"±.015" (14.2mm±0.38mm)
Actuating Force
14 oz. maximum, Internal spring to return slider to extended position
Backlash
.003" Max
Static Stop Strength
20 lb. minimum
Body Style
Rectangular
Termination Style
Turret Terminals

Environmental Specifications
Temperature Range
Static: -55°C to +125°C
Dynamic: -40°C to +125°C
Load Life
1 million shaft cycles at 0.25 Watts & 70°C, maximum 10% ΔR

  For more information:
Check Stock & Pricing    PDF Datasheet    Request for Quotation

Series 404
Datasheet
Request For Quotation
Check Stock & Pricing