|  Home   |  State-Elec.com   |  About State   |  Contact   |

Custom Potentiometers
Stock Commercial Potentiometers
Precision Single-Turn Potentiometers
Precision Multi-Turn Potentiometers
Mil-Spec Potentiometers
Linear Motion Potentiometers
Slide Potentiometers
Motorized Potentiometers
Non-Contact Sensors
Membrane Potentiometers
Rotary Encoders
Hall Effect Potentiometers
Alps Potentiometers


Industrial Joysticks


Turn Counting Dials
Instrument Knobs

On-Line Library
Glossary

Honeywell Linear Position Transducer Sensofoil Membrane Potentiometers
   Home Page > Instrument Knobs
DDS Series Knobs
Request For Quotation

DDS Series machined aluminum knobs have a skirt extended on the bottom portion of the knob for easier viewing of the rotation. Indicator triangle located on the skirt. RoHS compliant.
To create an RFQ, indicate the desired options as shown in this example:
Example Part Number: DDS50-1-5
Series
DDS		  Machined Aluminum Knobs with skirt 
Model
 Dimensions:
   A     B     C 
50 =  .500  .375  .685
75 =  .750  .590  1.000
90 =  .925  .708  1.250
Color
1 -
2 -
3 -
4 -
  Clear Gloss
 Black Gloss
 Clear Matte
 Black Matte
Shaft
 Shaft Diameter:
 5 -
 6 -
 6mm -
  .250"
 .125"
 6mm
Set Screw  Two 6-32 set screws.
Use the dropdown choices in the left column above to build a part number.
Additional Order information:
Quantity Required
 Date Required
Comments and special requirements:



Return to Instrument Knob Selection Guide

Call State Electronics at (800) 631-8083 to order by phone or for assistance with your custom application