PEL12 Series 12 mm Encoders with Illuminated Shaft
|
|
|
Features: |
• |
Compact Design, Long Life, High Reliabiliby |
• |
Single, Dual or Triple LED Designs |
• |
Momentary Switch option |
• |
Bushing or Bushingless |
• |
RoHS Compliant |
|
|
|
|
|
Model
|
PEL12S—Single LED
|
12mm Encoder, Illuminated Shaft
|
PEL12D—Dual LED
|
12mm Encoder, Illuminated Shaft w/Switch
|
PEL12T—Triple LED
|
12mm Encoder, Illuminated Shaft w/Switch
|
|
|
|
Electrical Specifications
|
Output
|
2-bit Quadrature Code |
Closed Circuit Resistance
|
3 ohms maximum |
Contact Rating
|
0.5 mA @ 5 VDC |
Insulation Resistance
|
100 megohms @ 250 VDC |
Dielectric Withstanding Voltage
|
300 VAC (at Sea Level) |
Electrical Travel
|
Continuous |
Contact Bounce
|
2.0 ms. maximum (15 RPM)
|
RPM (Operating)
|
100 maximum
|
|
|
|
Mechanical Specifications
|
Mechanical Angle
|
360° Continuous
|
Detent Torque
|
30 to 200 g-cm (0.42 to 2.77 oz.-in.)
|
Running Torque
|
50 g-cm (0.69 oz.-in.) maximum
|
Shaft Strength (Push)
|
5 kgf (11.0 lbs.)
|
Shaft Strength (Pull)
|
10 kgf (22.0 lbs.)
|
Weight
|
3 gm (0.1 oz.) max.
|
Terminals
|
Printed circuit board terminals
|
Soldering Condition
|
Wave Soldering: Sn95.5/Ag2.8/Cu0.7 solder with no-clean flux: 260 °C max. for 5±1 seconds
Hand Soldering: Not Recommended
|
|
|
|
Switch Specifications — PEL12D and PEL12T
|
Switch Type
|
Contact Push ON Momentary SPST
|
Power Rating
|
10 mA at 5 V DC (Resistive Load)
|
Contact Resistance
|
100 milliohms
|
Switch Travel
|
0.5 +0.0/-0.3 mm
|
Switch Actuation Force
|
450 ±200 gf (15.9 ±7.0 oz.)
|
|
|
|
Environmental Specifications
|
Operating Temperature
|
-10°C to +70°C (+14°F to +158°F)
|
Storage Temperature
|
-40°C to +85°C (-40°F to +185°F)
|
Operating Humidity
|
25% to 85% R.H.
|
Rotational Life
|
30,000 cycles minimum
|
Switch Life
|
20,000 cycles minimum (PEL12D and PEL12T)
|
IP Rating
|
IP40
|
|
|
|
|
|
|