PEC09 Series - 9mm Incremental Encoder

| Home | State-Elec.com | About State | Support |

Home Page > Bourns Potentiometers

PEC09 Series—9mm Incremental Encoder

PEC09 Series

Features:
•	Compact design, long life and high reliability
•	Momentary push switch option
•	Metal Bushing and Shaft
•	RoHS Compliant

Model

PEC09

9mm Incremental Encoder

Electrical Specifications

Output	2-bit Quadrature Code
Closed Circuit Resistance	3 ohms maximum
Contact Rating	10 mA @ 5 VDC
Insulation Resistance	100 megohms @ 250 VDC
Dielectric Withstanding Voltage	300 VAC minimum (at Sea Level)
Electrical Travel	Continuous
Contact Bounce	5.0 ms maximum (15 RPM)
RPM (Operating)	60 maximum

Mechanical Specifications

Mechanical Angle	360° Continuous
Running/Detent Torque	30 to 200 gf.cm (0.42 to 2.7 oz.-in.)
Mounting Torque	10.0 kgf.cm (8.67 lb.-in.) maximum
Terminal Bend Strength	300 gf (10.6 ozf)
Shaft Push-Pull Strength	10 kgf (22 lbf)
Weight	5 gm (0.17 oz) maximum
Terminals	Printed circuit board terminals
Soldering Condition	Wave Soldering: Sn95.5/Ag2.8/Cu0.7 solder with no-clean flux: 260 °C max. for 3-5 seconds Hand Soldering: Not recommended

Environmental Specifications

Operating Temperature	-10°C to +70°C (+14°F to +158°F)
Storage Temperature	-40°C to +85°C (-40°F to +185°F)
Humidity	MIL-STD-202, Method 103B, Condition B
Rotational Life	30,000 cycles minimum
IP Rating	IP40

Switch Specifications

Switch Type	Contact Push ON Momentary SPST
Switch Life	20,000 cycles minimum
Power Rating	10 mA at 5 V DC (Resistive Load)
Switch Travel	0.5mm or 1.5mm stroke
Switch Actuation Force	300 ±200 gf (10.6 ±7.0 ozf)

For more information:

Check Stock & Pricing PDF Datasheet Request for Quotation

Model PEC09
Datasheet

Check Stock & Pricing