Model 510E
Commercial Mechanical Encoder |
|
Description |
The Series 510E Commercial Mechanical Encoder is a cost effective alternative for rotary position sensing.
|
|
|
|
|
Features: |
• |
Direct digital output Eliminates the need for A/D Converters.
|
• |
High Resolution Up to 36 positions.
|
• |
Temperature stability Operating range of -40°C to +105°C.
|
• |
Mounting flexibility Horizontal and vertical configurations.
|
|
|
|
Electrical Specifications
|
Electrical Output
|
2-bit grey code - channel L leads channel R by 90° electrically in the CW direction. 4-bit grey code - absolute electrical position output.
|
Closed Circuit Resistance
|
5 ohms maximum
|
Open Circuit Resistance
|
Two separate output channels in quatrature, 90° ±45°
|
Contact Rating
|
Resistance Load - 250mA @ 28 Vdc maximum
|
Switching Loads
|
1.5mA @ 115 Vac 150mA @ 14Vdc
|
Bounce (Jitter)
|
5 ms/cycle @ 15 RPM
|
Dielectric Withstanding Voltage
|
100 Vac @ sea level
|
Electrical Travel
|
Continuous
|
Operating Speed
|
50 RPM maximum
|
|
|
|
Mechanical Specifications
|
Rotational Torque
|
3 to 5 oz. in. (2.16 to 3.60 Ncm)
|
Mechanical Travel
|
Continuous
|
Panel Mounting Torque
|
7 lbs.per inch (1.13Nm) maximum
|
Shaft Load Force
|
10 lbs.per inch (1.13Nm) maximum
|
Shaft Pull Force
|
10 lbs. Maximum
|
Terminals
|
Standard PC style, 3 terminals on 0.100" (2.54mm) grid-in-line perpendicular or parallel to shaft. Solder hook available on 0.200" grid.
|
|
|
|
Environmental Specifications
|
Operating Temperature
|
-40°C to +105°C
|
Storage Temperature
|
-55°C to +120°C
|
Humidity
|
Per MIL-STD 202, Method 106C: Insulation resistance shall be 1 Megohm maximum of a relative humidity 90% @ 25°C
|
Shock
|
Per MIL-STD 202, Method 213, Test Condition G, consisting of 18 impacts shock at 50 G's for duration of 11ms
|
Vibration
|
Per MIL-STD 202, Method 214, Test Procedure A
|
|
|
|
|
|
|