Shaft Rotation
|
Continuous in either direction
|
Operating Speed
|
300 rpm maximum
|
Rotational Life
|
10 million revolution minimum
|
Rotational Torque
|
1.5 oz. in. maximum.
Other torque ranges available.
|
Shaft
|
1/4 in(6.35mm) diameter, standard;
1/8 in.(3.175mm) diameter available, stainless steel
|
Bushing
|
3/8 in.(9.53mm) diameter standard;
1/4 in.(6.35mm) diameter available, brass, nickel-plated
|
Shaft End Play
|
.005 in.(0.127mm) maximum
|
Shaft Radial Play
|
.010 in.(0.127mm) maximum @ 1 in.(25.4mm) FMS with 3/8 in.(9.53mm) long bushing
|
Axial Force
|
15 lb. minimum push or pull force applied to shaft end
|
Terminals
|
PC Type: .025 in.(0.635mm) by .012 in.(0.305mm) thick brass, gold plated to facilitate soldering. Cable type: Four lead ribbon cable, color-coded, with .050 in. (1.27mm) spacing, 28 AWG.
|
Terminal Strength
|
Terminals withstand 2 lb. push or pull and a 90° bend.
|
Mounting Hardware
|
3/8 in. bushing, hex mounting nut 3/8 in.(9.53mm) x 32 thread, 1/2 in.(12.7mm) across flats, 3/32 in. (2.38mm) thick internal tooth lockwasher 11/16 in.(17.46mm) OD, .022 in.(0.56mm) thick.
|
Seals
|
Mounting seal and shaft seal available.
Controls are not sealed for board washing.
|
Marking
|
Consists of customer or Clarostat part number and EIA source and date code. Ink stamped on periphery of the control meets EIA RS230 & RS327 specifications.
|
Weight
|
PC type or cable type:
1 in.(25.4mm) FMS shaft and 3/8 in.(9.53mm) bushing: .046 lb.(21 gm.)
|
Locating Pin
|
Single pin located 17/32 in.(13.49mm) from center can be supplied. Pin withstands 5 in. lb. torque.
|
