To create an RFQ, select required parameters below
|
Material
|
| Material: |
Standard: DuFoil top and bottom membranes, Manual Wiper
Magnet: DuFoil top and bottom membranes, Magnetic Wiper
Hybrid: Additional top layer, Manual Wiper
FR4: FR4 backing, Manual Wiper
FR4 Magnet: FR4 backing, Magnetic Wiper
Hybrid FR4: FR4 with additional top layer, Manual Wiper
|
|
|
Length
|
| Active Length: |
- 50mm, 100mm, 200mm, 300mm, 400mm, 500mm
Special lengths from 9mm to 1000mm are available.
Describe requirements below.
|
|
|
Width
|
| Width: |
- 13mm option available for Standard and Magnet devices
- 16mm option available for Hybrid devices
- 22mm is the standard width
Special widths are available. Describe requirements below.
|
|
|
Resistance
|
| Resistance (Ohms per 100mm): |
- 2.5 kΩ per 100mm is standard for foil-backed devices
- 10 kΩ per 100mm is standard for FR4-based devices
Special Resistances to 150 kΩ per 100mm are available. Describe requirements below.
|
|
|
Tolerance
|
| Tolerance: |
- 30% is standard for all devices
- 10% is an available option
Special Tolerances are available.
Describe requirements below.
|
|
|
Linearity
|
| Linearity: |
- 2% is standard for all devices
- 1% is an available option for foil-based devices
- .5% is an available option for FR4-based devices
Special Linearity tolerances are available.
Describe requirements below.
|
|
|
IP Rating
|
| IP Rating: |
- The Standard foil-based version is rated at IP54
- Other devices are rated at IP42
Special IP Ratings to IP 67(NEMA 4X) are available.
Describe requirements below.
|
|
|
|
|