Model 7280 Request for Quotation

Home Page > Precision Multi-Turn Potentiometers > 7280 Datasheet

Series 7280 Multi-Turn Potentiometer
Precision 10-Turn Wirewound Element
On-Line Request For Quotation

To create an RFQ, indicate the desired options
as shown in this example part number: 7286-R10K T2 L.25 CT

Model

PDF Datasheet Model 7281 1/8" Shaft, 1/4" Bushing
Model 7283 1/8" Shaft, Servo
Model 7284 6mm Shaft, 3/8" Bushing
Model 7286 1/4" Shaft, 3/8" Bushing
Model 7288 1/4" Shaft, 3/8" Bushing (heavy side load)

Resistance

Resistance in Ohms:

100, 200, 500, 1K, 2K, 5K, 10K, 20K, 50K, 100K

Tolerance

Resistance Tolerance:

T5 = ±5% (Standard)
T2 = ±2% (Custom)
T1 = ±1% (Custom)

Linearity

Independent Linearity:

L.25 = ±0.25% (Standard)
L.15 = ±0.15% (Custom - minimum for R<300Ω)
L.075 = ±0.075% (Custom - minimum for R≥300Ω)

Enter details about option requirements in the "Comments" box below

CT Option

CT = Center Tap

LT Option

LT = Linearity Tape

RS Option

RS = Rear Shaft Extension (7283, 7286 single cup only)

FS Option

FS = Flatted Shaft

SS Option

SS = Slotted Shaft (Standard on single cup 7286 without RS)

SL Option

SL = Shaft Lock (7281, 7286 only)

HT Option

HT = High Torque, 2 to 6 oz.-in. (7286 only)

2G Option

2G = Dual Gang

FT Option

FT = Gold Plated Solder Lug Terminals

Use the dropdown choices in the left column above to build a part number. Additional Order information:
Quantity Required	Date Required
Comments and special requirements:
Return to Model 7280 Datasheet Call State Electronics at (800) 631-8083 to order by phone or for assistance with your custom application