Series WW54 Wirewound Potentiometer

Home Page > Wirewound Controls > WW54 Datasheet

Series WW54 Wirewound Potentiometer
Request For Quotation

To create an RFQ, indicate the desired options
as shown in this example part number: WW54NSL-102A

WW54	Series WW54

Bushing

Bushing:

N = Standard
L = Locking
S = Panel and shaft seal (Standard)
T = Panel and shaft seal (Locking)

Shaft style

Shaft style:

S = Slotted

Shaft Length

Shaft length:
L = 5/16" Standard bushing only M = 7/16" Locking bushing only D = 7/8" Standard bushing only

Resistance

Resistance in Ohms:
150 = 15 ohms 200 = 20 250 = 25 350 = 35 500 = 50 750 = 75	101 = 100 ohms 151 = 150 201 = 200 251 = 250 351 = 350 501 = 500	751 = 750 ohms 102 = 1K 152 = 1.5K 202 = 2.0K 252 = 2.5K
Standard values shown. Custom values available - Specify requirements in the "Comments" box below.

Taper

Taper and Tolerance:

A = Linear
C = Logarithmic CW
E = Reverse Logarithmic CCW

Hardware

Mounting Hardware:

Standard = Hex mounting nut & Lockwasher. Hex locking nut supplied for Locking style bushing
Custom = Specify requirements in the "Comments" box below

PT Option

Printed Circuit Terminals option:

PT = Printed circuit terminals

SS Option

Stainless Steel Shaft option:

SS = Stainless Steel shaft.
Specify requirements in the "Comments" box below

DG Option

Two Sections, Concentric Shafts:

DG = Multiple gangs, concentric shafts.
Specify requirements in the "Comments" box below

Use the dropdown choices in the left column above to build a part number. Additional Order information:
Quantity Required	Date Required
Comments and special requirements:
Return to Series WW54 Datasheet Call State Electronics at (800) 631-8083 to order by phone or for assistance with your custom application